+ Reply to Thread
Results 1 to 10 of 10

Thread: arm cable

  1. #1

    Default arm cable

    Hi. New here so please bear with me

    Simple question. How exactly should you wire a non stock Linn arm cable to an Ekos arm? As I understand it, both the small earth strap which connects to the sub-chassis and the longer one which connects to the pre-amp back are common and should be connected to the top pin of the arm plug din socket. Then the right and left signal ones should go as per picture.



    Now suppose I want to use two lenghts of braided shielded cable with both independent + and - signals insulated inside each, where should I solder the braided shield or should they not be connected anywhere at all?

    Sorry for the lame question but I really need some advice.

    Cheers

    k

  2. #2
    Join Date
    Dec 2009
    Location
    Adelaide, South Australia
    Posts
    1,215
    Rep Power
    333365

    Default

    Send it to Johnny ...
    I have a Rock and I'm not afraid to use it.

  3. #3
    Join Date
    May 2007
    Location
    scotland, , United Kingdom
    Posts
    5,828
    Blog Entries
    1
    Rep Power
    351399

    Default

    your on the wrong forum for self help with shite components that don't suit the arm design matey

    Last edited by j7; 16th February 2017 at 23:41.
    www.audioorigami.co.uk

    And visit my face book page--- check out Audio Origami

    http://www.facebook.com/AudioOrigamiTonearms

  4. #4
    Join Date
    Nov 2016
    Location
    Sweden
    Posts
    169
    Rep Power
    0

    Default

    Sems like your on the wrong forum.....

    /L
    NO ONE : Tangerine Audio Stiletto, Plateau, Skorpion, SME V ( D ), DV DRT XV 1S, Chord Sign Tuned Aray, Cirkus, Radikal Klimax, Tranquility.
    NO LINN : Woodsong, PEEK, SSP 12, AI bobbin https://www.linnarts.se

  5. #5

    Default

    Ok got the message. The pic showed was just an example but I'll rephrase the question. How do you wire your Linn arm cables, J7? Too much to ask? I just might buy one from you if you will supply it with BNC plugs and if I can return it if not happy. Does this sound better?
    Last edited by kota; 18th February 2017 at 02:04.

  6. #6
    Join Date
    Feb 2008
    Location
    Carmarthenshire, West Wales.
    Posts
    1,030
    Rep Power
    155406

    Default

    Quote Originally Posted by kota View Post
    Ok got the message. The pic showed was just an example but I'll rephrase the question. How do you wire your Linn arm cables, J7? Too much to ask? I just might buy one from you if you will supply it with BNC plugs and if I can return it if not happy. Does this sound better?
    I should think it is too much to ask, being J7's business.


    Best wishes

    John R
    Last edited by John R; 19th February 2017 at 14:33. Reason: Final comment deleted - out of order. Sorry Kota.

  7. #7

    Default

    I'll get my coat now. Thanks for the wonderful time.

    Cheers

  8. #8
    Join Date
    May 2007
    Location
    scotland, , United Kingdom
    Posts
    5,828
    Blog Entries
    1
    Rep Power
    351399

    Default

    lol

    i don't really discuss how i work on the arms
    to many copy cats about for that

    but look through the countless customers on this forum that had there arms fettled by me, and you will see a pattern of happy customers
    www.audioorigami.co.uk

    And visit my face book page--- check out Audio Origami

    http://www.facebook.com/AudioOrigamiTonearms

  9. #9
    Join Date
    May 2007
    Location
    Glasgow
    Posts
    7,924
    Rep Power
    209996

    Default

    Johns work on arms is exemplary.

    It's just his other habits that are a bit iffy
    Do to others as you would have them do to you. (Luke 6:31)

    From that time on Jesus began to preach, “Repent, for the kingdom of heaven has come near.” (Matthew 4:17)

  10. #10
    Join Date
    Mar 2015
    Location
    Leeds
    Posts
    532
    Rep Power
    0

    Default

    Are you wiring up the DIN plug or are you on about the cable inside the arm?

    The top pin is the physical earth of the arm casing not a signal ground. The cable for each channel inside the arm should be twisted together (like an ethernet cable), you'll get noise otherwise, if you're using shielded cable (although I wouldn't for a tonearm) then yes the shielding should also be connected to that earth.

    HTH

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts